ग्लास ग्रीनहाउस वेंटिलेशन स्क्रीनिंग और छायांकन प्रणाली के लिए 3GG मोटर गियर बाक्स गियर मोटर
वास्तु की बारीकी
कैसे इस्तेमाल करे
गियर मोटर क्या है?
गियर मोटर, भी मोटर गियर बाक्स के रूप में जाना जाता है, विद्युत मोटर कि उच्च टोक़ उत्पादन करने के लिए जबकि एक कम हॉर्स पावर, या कम गति, मोटर उत्पादन को बनाए रखने के लिए बनाया गया है की एक विशिष्ट प्रकार है। गियर मोटर्स कई अलग अलग अनुप्रयोगों में पाया जा सकता है, विशेष रूप से ग्रीन हाउस, पशुओं और कृषि उद्योग के लिए, हमारे मोटर्स उपलब्ध विकल्पों में छत झरोखों संचालित करने के लिए, दीवार झरोखों, छत छायांकन और स्क्रीनिंग कर रहे हैं, वे श्रृंखला कपलिंग्स साथ शाफ्ट कि संरेखण के लिए क्षतिपूर्ति करने देते हैं त्रुटियों और आसानी से पूरे शाफ्ट को परेशान किए बिना हटाया जा सकता है।
Exported To 48 Countries:
Fenglong Kingzo® Electric Film Reelers and Gear Motors have been serving customers in 48 countries since 2003.
Three main issues in gear motors that are currently on the market
1) The failure rate of the limit switch is too high, While the limit switch is locked when the gear motor is in operation, if the limit control switch fails, it causes serious damage to the window or curtain system.
2) The braking distance is too long, causing insufficient closure of windows and inadequate curtain covering, and this damages the whole system.
3) Motor burnout due to phase loss or overload of the power supply, greenhouse gear motors are mostly used in rural areas, so the power system often has phase loss, and if a technician fails to install the phase loss protection device in time, the motor will burn out.
3GG Gear Motor: the failure rate of the limited switch has been drastically reduced to 5‰ from 2%
At present, the most common quality problem of a gear motor is damage that occurs to the limit switch control system.
This happens when the self-locking performance of the gear motor fails to be qualified and the braking distance is too long.
Statistical results of advanced gear motors shows that when the braking distance is less than 10mm, the failure rate is greatly reduced.
In addition, outside experts have confirmed that the braking distance of our 3GG® gear motor is less than 10mm (5.2 rpm) and thus the failure rate is reduced to 5‰ from 2%.
3GG Gear Motor: the self-braking performance is excellent and meets the standards of a high precision window opening system
3GG® adopts the final stage worm gear self-locking transmission system, which greatly improves the self-locking performance.Even the braking distance of the 5.2 rpm gear motor (usually 2.6 rpm) can reach less than 10mm, which fully meets the requirements of a high-precision windowing system and prolongs the product life.
3GG Gear Motor: overload protection and power phase loss protection function added
Our 3GG® gear motor has added overload protection and power phase loss protection functions to the limit switch control system.
When the three-phase power supply becomes two-phase, it automatically stops.When the load exceeds 1.5 times the rated load, it also automatically stops. After the fault is removed, the motor will run again, thus greatly reducing the number of after-sales services.
3GG Gear Motor: manual opening and closing device added for power failure
In the livestock industry, when the windows of a barn are closed, the indoor temperature rises rapidly due to the power failure, affecting the growth of indoor poultry or even causing a large number of deaths. Manual devices are now added so when the power is off, window opening or curtain pulling can be done via manual operation to ensure the barn or greenhouse continue to operate normally.
Ingress Protection Grade: IP55, Anti-condensation added to protect the safety of circuit diagram
Various Power and Torque for Choosing
Long Lifespan Guarantee
Quality-assured, from purchasing date, within the warranty period, FLC would do full compensate or replace them all for problematic products, because we know you rely on our equiment every day. Fenglong motors have proved themselves in this field over many years of use. Thanks to our meticulous purchasing methods, extensive testing procedures and streamlined production process, we’re able to guarantee the highest possible quality. Even small details, such as using every single small bolt and nut, help ensure our motors stand out from the competition.
पैकिंग और वितरण