Co je skleníkový krycí fólií?
Greenhouse covering film, also known as agricultural plastic, polyethylene, poly film or greenhouse plastic, is a durable and inexpensive way to cover your little backyard hobby greenhouse or large commercial greenhouse project, it is also widely used in single and double layer greenhouse.
Crystal Clear, Vynikající světelná propustnost a Clarity
Superior performance of transparency, light transmission rate is more than 90%, the higher transmission rate ensures adequate lights, which can be absorbed by the plants and help optimize yield in greenhouse applications
Higher Addictive of Metallocene Resins to keep the film longer-lasting clear and tough.
UV ochrana, delší životnost a dlouhověkost:
Advanced UV stabilizers maximize physical properties for the longer life of film and help protect it from chemical damage. Apart from the occasional tornado, hurricane, or hailstorm, more damage is done to greenhouse film by sunlight than any force of nature. It’s the ultraviolet component of sunlight that does the damage, resulting in yellowing and weakening of the covering film. Fortunately, you can buy greenhouse film that has built-in resistance to the damaging effects of UV radiation. If you buy a plastic that does not have UV protection, you can expect a very short service life from that poly – very possibly no more than a single year. Most greenhouse films that are treated with UV protection, on the other hand, have a service life rating of from 3 to 5 years.
Anti-Drip & Anti-Dust
Droplets formed at the inside surface of greenhouse films due to water-condensation have negative consequences on plant quality and growth, as they reduce light transmission and increase the incidence of certain diseases, To prevent this from occurring, we use a special anti-drip (AD) additive, which flattens the water droplets into a layer of water that runs down the sides of the greenhouse. So the film with the function of Anti-Drip can reduce the need for pesticides, delay the onset of diseases, significantly improve light transmission, promote early harvesting, and contribute to enhanced yield quantity and quality.
Pomocí našeho pokročilé multi-vrstvy technologie vytlačování, přidáme aditivum prachu snížit na horní vrstvě našich krycích vrstev. Tímto způsobem je horní vrstva krycí fólie je obzvláště hladký a to výrazně snižuje hromadění prachu.
Silnější punkce a odolnosti proti roztržení
An unique manufacturing process conditions and quality control procedures provide to the films excellent mechanical strength, we are using special high-strength polymers. Our advanced Japanese resin technology provide TOYOTANI’s Polyethylene Films with superior tear strength, These films offer additional safety in critical areas with very strong winds.
100% importovanou značkou Nové materiály
Fenglong has 20 years experience and careful selection of raw materials, we import the additives from Japan, and other materials from USA, Japan, Iran, Saudi Arabia, to keep the film top quality.
Lepší Termické Effect
TOYOTANI special Multi-layer films, containing a combination of EVA and Infra-Red additives skillfully structured in the middle layers, which absorb the Infra-Red radiation and reduce heat losses throughout the night.
Premium hydrotalcit Materiál provádět lepší Thermicity
Výhody tepelných filmů jsou:
- Ochrana před mrazem a nízké teploty.
- Hladší pokles teploty a vyšší noční teploty celkově.
- Snížená spotřeba energie na vytápění.
- Vyšší výnos zemědělských plodin.
- Dříve sklizeň.
- Lepší kvalita plodin.
Jak tepelné Skleníkové povlaky funguje?
Během dne ve skleníku, sluneční světlo, složený z obou viditelného světla a krátké infračervené světlo, je absorbováno rostlin, půdy a konstrukčních materiálů, což vede v nich zahřívání. V noci jsou všechny objekty, které byly absorbovány tuto energii uvolní to tak dlouho, infračervené záření. Tepelné fólie bude absorbovat a znovu vyzařovat tuto energii, udržuje vyšší skleníkový teplotu a tím i nižší náklady na vytápění. Tepelné filmy obecně platit za sebou v průběhu prvního roku pokrytím
Custom Cut délka a šířka
Special cut lengths and width are available, so you can order the exact amount at different size according to your different greenhouse disign.
Skleník krycí fólie je k dispozici v rozsahu tloušťky, obvykle v rozmezí od 3 tisícin palce (0,08 mm) až 8 tisícin palce (0,20 mm), Poznámka: 1 mil je 0.0254mm.The tloušťka polymerní fólie převážně ovlivňuje životnost a očekává použitelné životnost plastu. Také silnější z plastu, tím méně světla se přenáší přes to. Avšak tloušťka plastu má jen malý vliv na množství tepla, které může dojít ke ztrátě přes plastu.
6 a 8 mil (0,15 mm a 0,20 mm), filmy jsou nejčastěji používané tloušťky skleníkového plastu.